A surface-applied, integral crystalline waterproofing material, PENETRON is used for waterproofing and chemical protection at above and below ground level. PENETRON is applied by brush or spray to either the positive or the negative side of the concrete and in the presence of moisture penetrates deeply into the structure. The ensuing chemical reaction fills microcracks, pores and capillaries with an insoluble crystalline formation, which prevents water and water-borne chemicals from entering, even under high hydrostatic pressure. Cracks that develop during the lifetime of the concrete are resealed by PENETRON, resulting in permanent concrete protection.
Penetron Data Sheet
Penetron Material Safety Data Sheet
Penetron IFU (Instruction For Use)
Penetron Surface applied waterproof coating complies with DWI regulation 31(4)(A) of the water supply (water Quality) regulations 2000 SI No 3184 & the water supply (water Quality) regulations 2010 SI No 994 (W.99).
Available in 25,10 and 5 Kg Hermetically Sealed Pails.
PENETRON ADMIX is a non-toxic, 3rd generation crystalline admixture in powder form that is added to new concrete during batching. Once inside the concrete, it reduces concrete permeability by permanently sealing microcracks, pores and capillaries and effectively protecting the concrete against water penetration and the effects of deterioration, even under high hydrostatic pressure. PENETRON ADMIX provides projects with self-healing concrete with the ability to reseal cracks that develop during the lifetime of the concrete.
PENETRON ADMIX is compatible with all commonly used workability admixtures (e.g. superplasticizers, retarders) and mix design formulations (trial mixes recommended prior to casting.
PENETRON ADMIX complies with the requirements of Regulation 31 of The Water Supply (Water Quality) Regulations 2000 (Statutory Instruments 2000 No 3184) and the relevant regulations (for public drinking water suppliers) which apply to the approval of substances and products used in the provision of public water supplies within the United Kingdom.
Available in 25 Kg Hermetically Sealed Pails.
Surfasology SURFASFIX SBR 5L
What is SURFASFIX™ SBR:
Is a white coloured Styrene-Butadiene Co-polymer Latex designed for use as a Bonding and Waterproof additive with Cement compositions. SURFASFIX™ SBR is used in concrete repairs, rendering, concrete protection, waterproofing and tanking.
TamCrete PolyPlug is a fast setting, polymer compound that instantly stops running water or seepage through masonry or concrete substrates. It becomes harder and more resistant when subjected to constant water pressure. TamCrete PolyPlug is a non-shrink material that expands slightly and sets in about 2 minutes, depending on the temperature of the mixing water and the surface to which it is applied. Lower temperatures will retard the set time and higher temperatures will accelerate the set time.
TamRez HydroBand is a versatile sealing system for joints and cracks subject to normal or large movements.
TamSeal 10F is a two-component, acrylic modified cementitious coating. It is the ideal product to waterproof and re-surface concrete / masonry and can be formed on-site using simple mixing methods. TamSeal 10F creates an effective barrier against waterborne salts and atmospheric gases and provides a hard wearing, seamless, waterproof membrane for roofs and concrete protection.