Penecrete Mortar

Penetron Product Range

Penecrete Mortar

Used in combination with PENETRON for filling non-moving cracks and construction joints, form-tie holes, honey-combed areas and structurally damaged concrete.

PENECRETE MORTAR consists of Portland cement, very fine treated silica sand and various active, proprietary chemicals. It is applied in laminated layers to areas that have been opened and cut-back to sound concrete for repair to provide protection against water ingress.

Penecrete Mortar Data Sheet
Penecrete Mortar Material Safety Data Sheet
Penecrete Mortar IFU (Instruction For Use)
Penecrete Mortar complies with DWI regulation 31(4)(A) of the water supply (water Quality) regulations 2000 SI No 3184 & the water supply (water Quality) regulations 2010 SI No 994 (W.99).

Available in 25, 10 and 5 Kg Hermetically Sealed Pails

 

Penetron PenePlug

Peneplug

Peneplug / Waterplug

A rapid-setting, crystalline-based, cementitious compound designed to stopping active leaks even under high hydrostatic pressure. PENEPLUG is recommended as a waterproof plugging mortar or where rapid-setting is required. WATERPLUG can be used for underwater applications, extreme rapid setting.

Available in 25, 5 and 4 Kg Hermetically Sealed Pails.

TamCrete PolyPlug

TamCrete PolyPlug

TamCrete PolyPlug

TamCrete PolyPlug is a fast setting, polymer compound that instantly stops running water or seepage through masonry or concrete substrates. It becomes harder and more resistant when subjected to constant water pressure. TamCrete PolyPlug is a non-shrink material that expands slightly and sets in about 2 minutes, depending on the temperature of the mixing water and the surface to which it is applied. Lower temperatures will retard the set time and higher temperatures will accelerate the set time.

TamPur 100

TamPur 100

TamPur 100

TamPur 100 is a single-shot hydrophobic polyurethane based on MDI in combination with polyether polyols and an amine based catalyst. The system only reacts when it comes into contact with water, producing a rigid polyurethane foam.

TamPur 150

TamPur 100

TamPur 150

TamPur 150 is a single component hydrophilic polyurethane in combination with polyether polyols. It only reacts when it comes in contact with water and forms a flexible polyurethane seal.

TamSeal 10F

TamSeal 10F

TamSeal 10F

TamSeal 10F is a two-component, acrylic modified cementitious coating. It is the ideal product to waterproof and re-surface concrete / masonry and can be formed on-site using simple mixing methods. TamSeal 10F creates an effective barrier against waterborne salts and atmospheric gases and provides a hard wearing, seamless, waterproof membrane for roofs and concrete protection.