TamCrete PolyPlug

TamCrete PolyPlug

TamCrete PolyPlug

TamCrete PolyPlug is a fast setting, polymer compound that instantly stops running water or seepage through masonry or concrete substrates. It becomes harder and more resistant when subjected to constant water pressure. TamCrete PolyPlug is a non-shrink material that expands slightly and sets in about 2 minutes, depending on the temperature of the mixing water and the surface to which it is applied. Lower temperatures will retard the set time and higher temperatures will accelerate the set time.

TamPur 100

TamPur 100

TamPur 100

TamPur 100 is a single-shot hydrophobic polyurethane based on MDI in combination with polyether polyols and an amine based catalyst. The system only reacts when it comes into contact with water, producing a rigid polyurethane foam.

TamPur 150

TamPur 100

TamPur 150

TamPur 150 is a single component hydrophilic polyurethane in combination with polyether polyols. It only reacts when it comes in contact with water and forms a flexible polyurethane seal.

TamPur Cleaners

TamPur Cleaners

TamPur Cleaners

Normet manufactures two cleaners. TamPur Ecoclean is a mixture of non-volatile, chloride-free, non-toxic organic solvents for cleaning up equipment when using the Tam Polyurethane range in confined spaces or underground. TamPur Cleaner is a mixture of non-volatile solvent and lubricant for cleaning of equipment when using the Tam Polyurethane range.

TamRez 210

TamRez 210

TamRez 210

TamRez 210 is a low modulus, extra low viscosity, epoxy adhesive designed to be injected into cracks which exhibit minor movement or are subject to shock or vibration. Its low viscosity allows maximum penetration into small, hairline cracks or fractures. TamRez 210 is insensitive to moisture, allowing for injection into damp cracks. After injection and in its cured state, TamRez 210 returns structural integrity and protects reinforcement while at the same time compensating for movement and vibration.

TamRez 310

TamRez 310

TamRez 310

TamRez 310 is a high modulus, high strength epoxy gel designed for the surface sealing of cracks prior to injection, for surface spall repairs and bonding new concrete to old. It is moisture insensitive and will cure in a damp environment.