MAPEI KERAQUICK

MAPEI Keraquick Grey

MAPEI KERAQUICK

Multi-purpose, rapid-hardening sealant and adhesive, suitable for internal and external applications. Particularly suitable for sealing cracks, fixing gripper, door trims, stair nosings and skirting boards. Suitable for sealing joints, including those subject to traffic.

For professionals only not for retail use.

MAPEI LATEXPLAN TRADE

MAPEI LATEXPLAN TRADE

MAPEI LATEXPLAN TRADE

Trade levelling and smoothing compound, protein-free with low odour and high compressive strength. For levelling or smoothing differences in thickness of 1-10 mm to receive all types of floor coverings. Slower hardening - suitable for rubbing down.

MAPEI LATEXPLAN TRADE FAST

MAPEI LATEXPLAN TRADE FAST

MAPEI LATEXPLAN TRADE FAST

Latexplan Trade Fast is a two-part rapid setting, fast drying smoothing compound. It is suitable for smoothing new and existing substrates prior to the installation of floor coverings. Latexplan Trade Fast can be walked on within one hour and is ready to receive floor coverings in less than 3 hours.

MAPEI MAPEBAND

MAPEI Mapeband Joint Tape

MAPEI MAPEBAND

Alkali-resistant rubber tape with textile backing/edges. For use with cementitious waterproofing systems and liquid membranes. For the flexible waterproofing of angles / junctions expansion joints to be treated with MAPELASTIC, MAPELASTIC SMART, MONOLASTIC ULTRA, MAPELASTIC AQUADEFENSE or MAPEGUM WPS.

Pre-formed corners available.

MAPEI MAPECEM PRONTO

MAPEI MAPECEM PRONTO

MAPEI MAPECEM PRONTO

Pre-blended, ready to use, fast-setting and drying hydraulic binder for shrinkage compensated screeds. For the formation of bonded, un-bonded, floating and heated screeds on existing and new slabs internal or external. Mapecem Pronto just needs mixing with water. Particularly suitable where fast-drying is required for minimum downtime.

MAPEI MAPEFILL GP

MAPEI MAPEFILL GP

MAPEI MAPEFILL GP

Preparation: substrates must be sound, clean, free of dust, grease, debris and laitance and sufficiently rough. Surfaces must have previously been pre-soaked, however, excess water shall be removed before application of the grout.

MAPEI MAPEFLEX PU30

MAPEI MAPEFLEX PU30

MAPEI MAPEFLEX PU30

Two-component, high-strength, thixotropic epoxy-polyurethane sealant with high chemical resistance for movements up to 10%.

MAPEI MAPELASTIC AQUADEFENSE

MAPEI Mapelastic Aquadefense

MAPEI MAPELASTIC AQUADEFENSE

Ready to use, flexible, ultra rapid drying waterproofing membrane for interior and exterior use in showers, wet rooms and on balconies*. Can be tiled after 4 hours. For use on screed, render, concrete, plywood and ceramic finishes. Can be reinforced with Mapetex SEL to provide an anti-fracture membrane.

MAPEI MAPESIL LM

MAPEI PRIMER MF

MAPEI MAPESIL LM

Solvent-free, odourless, non-staining, neutral cross-linking silicone sealant for natural stone, marble and agglomerate stone.

MAPEI PRIMER G

MAPEI PRIMER G

MAPEI PRIMER G

Water-based synthetic resin primer for treating gypsum or anhydrite substrates prior to installing ceramic tiles or stone material with cementitious adhesives. PRIMER G has very low emissions of TVOC. For minimising general dust suppression and reducing the absorption of very porous substrates.

MAPEI PRIMER MF

MAPEI PRIMER MF

MAPEI PRIMER MF

Two component solvent free epoxy primer to be used as a adhesion promoter for the Mapefloor product range and to consolidate and waterproof cement substrates.

MAPEI PRIMER S

MAPEI PRIMER S

MAPEI PRIMER S

Aqueous water-repellent primer for moisture proofing gypsum board, wood, gypsum plaster etc. subject to humidity in bathrooms and kitchens before the installation of ceramic tiles with cementitious or paste adhesives.

MAPEI UK LIMITED

 Mapei UK Limited Logo

Mapei UK Limited

Established in 1989, Mapei UK Ltd moved to the West Midlands in 1999, and in 2004 cemented its commitment to the UK market with the completion of a brand new state-of-the-art manufacturing facility in Halesowen, near Birmingham in the West Midlands.

The UK headquarters is Mapei's 47th manufacturing plant worldwide. The building accommodates manufacturing, stock, marketing, sales and technical services - all dedicated to the provision of efficient and friendly customer service - all under one roof. This 7.5 acre site is home to on-site training facilities, holding regular training and educational sessions.

Manufacturing facilities at Halesowen are capable of producing up to 103,000 tonnes of product annually. We now have 150 members of staff employed by Mapei UK to provide support and assistance to an ever increasing customer base of over 900.

Over 100 products are manufactured in the UK. In addition to an expanding manufacturing plant and offices in the West Midlands, Mapei UK Ltd has a dedicated team of Specification Managers nationwide and an expert Technical Services Department based at UK Headquarters. Mapei also offer a full NBS specification service and RIBA accredited CPD seminars are available on request.

Mapei UK has a fully equipped Training facility which offers general product range training and more in-depth product demonstrative systems specifically designed for solutions to most conventional and exceptional of situations.

MAPEI ULTRACOLOR PLUS

MAPEI Ultracolor PLUS

MAPEI ULTRACOLOR PLUS

Fast setting and drying flexible polymer modified antiefflorescence grout for joints from 2-20 mm. Water-repellent with DropEffect and anti-mould with BioBlock technology. Available in 26 colours. Suitable for interior and exterior wall and floor grouting of ceramic tiles, porcelain, terracotta, stone material, glass and marble mosaics - not suitable for soft glazed tiles. Ensures complete uniformity of colour.

Penecrete Mortar

Penetron Product Range

Penecrete Mortar

Used in combination with PENETRON for filling non-moving cracks and construction joints, form-tie holes, honey-combed areas and structurally damaged concrete.

PENECRETE MORTAR consists of Portland cement, very fine treated silica sand and various active, proprietary chemicals. It is applied in laminated layers to areas that have been opened and cut-back to sound concrete for repair to provide protection against water ingress.

Penecrete Mortar Data Sheet
Penecrete Mortar Material Safety Data Sheet
Penecrete Mortar IFU (Instruction For Use)
Penecrete Mortar complies with DWI regulation 31(4)(A) of the water supply (water Quality) regulations 2000 SI No 3184 & the water supply (water Quality) regulations 2010 SI No 994 (W.99).

Available in 25, 10 and 5 Kg Hermetically Sealed Pails

 

Penetron CRM M700

Structural Repair

Penetron CRM M700 / Structural Repair Mortar

A repair mortar for surface restoration and construction purposes. The product is supplied in a powder form and consists of Portland cement, specially treated quartz sand, patented chemical additives and reinforcing fibers.

It is mixed with water prior to application.

PURPOSE: For the horizontal and vertical repair and restoration of reinforced concrete and masonry structures and as an additive to the wet shot-crete method of waterproofing masonry structures.
 
Available in 25 Kg Hermetically Sealed Pails.

 

TamCrete 40HB

TamCrete 40HB

TamCrete 40HB

TamCrete 40HB is a single component cementitious mortar which incorporates advanced cement chemistry, micro silica, polypropylene fibres and re-dispersible co-polymers. It provides a rapid hardening, low density, high strength mortar. The thixotropic nature enables easy high build trowel or spray application for the structural repair of voids and rendering of both vertical and horizontal surfaces. The product is supplied as a single component system ready for onsite mixing, only requiring the addition of clean water.

TamCrete Bond And Seal

TamRez 310

TamCrete Bond And Seal

TamCrete Bond And Seal is a formulated acrylic admixture used both as a primer for wet-to-dry cementitious systems and as an emulsion in mixtures.

TamRez 210

TamRez 210

TamRez 210

TamRez 210 is a low modulus, extra low viscosity, epoxy adhesive designed to be injected into cracks which exhibit minor movement or are subject to shock or vibration. Its low viscosity allows maximum penetration into small, hairline cracks or fractures. TamRez 210 is insensitive to moisture, allowing for injection into damp cracks. After injection and in its cured state, TamRez 210 returns structural integrity and protects reinforcement while at the same time compensating for movement and vibration.